HISTOLOGY AND SURGICAL PATHOLOGY

DISSECTION TABLE

                                      

Back to intro   Back to products


 

DESCRIPTION

The basic model has a sink and a work top with a downward exhaust. Its height can be adjusted continuously and it is electrically regulated. The synthetic dissection plate can also be used as a cover for the sink.

Between the sink and the exhaust basin, there are two funnels in which you can pour liquids. Each funnel has a built-in filter and is connected with the waste bin for chemicals.

The sink is equipped with a mixer tap that can be used as a sprinkler for hot and cold water and a nozzle which can be pulled out. You can also regulate the rinse in the exhaust basin with this tap.

On both sides of the sink, there is a tap for fresh chemicals. This tap is connected with the containers via a pump.

On one side of the table, a shelf for instruments can be provided (optional). At the front of the table, a waste bin (optional) can be fitted.

The superstructure offers extra possibilities which increase the comfort and ergonomics. The built-in fluorescent lamps function on high-frequency high voltage and do not flash. If extra light is needed, you can put in two adjustable spotlights. A magnifier is fitted on a telescopic arm with cold light. It is also possible to connect a microphone and a dictaphone and to build in a camera. Various dispensers for 2 x 100 towels and 4 x 100 gloves are available. Storage space for all sorts of necessities, such as paper, embedding cassettes,  etc., is provided.

Back to the top of this page 

ERGONOMICS

• Adjustable height within a 300 mm (12") range.
• Allows you to work in a sitting or standing position.
• General lighting of 1,500 lux.
• All conveniences at your fingertips.
• Low-noise.
• Dissection plate with black insert.

Back to the top of this page 

HEALTH

• Downward exhaust.
• Container for used fixatives.
• Pumps for chemicals.
• Dispenser for disinfectants.
• Cistern with strainer.
• Dissection plate with drain.

Back to the top of this page 

CONVENIENCE

• Storage compartments.
• Towel and glove dispensers.
• Prewired recording facilities (optional dictaphone).
• Rinsing equipment.
• Shelf for instruments.
• Waste bin (optional).

Back to the top of this page 

DESIGN

• Easily removable.
• Simple installation.
• Durable welds.
• Made of stainless steel (304 and 316 TI)
• Low voltage operation.
• Easily maintained and cleaned.

Back to the top of this page 

OPERATION

  • 1. Main switch : Switches the feeder tension, and thus all the electrical facilities, on and off. 

    2. Height adjustment : The work top can be adjusted within a +12" (300 mm) range. You simply push the top or the bottom of the switch. The work top keeps the same height as long as the switch is not activated, even if you switch off the electricity network. The height of the table can fluctuate between 32" (820 mm) and 44" (1,120 mm).

    3. General lighting (only for a table with a superstructure) :Switches on and off the fluorescent lamps in the superstructure.

    4. Potentiometer (only for a table with a supplied ventilator) : Regulates the intensity of the exhaust, which can be adjusted continuously.

    5. Magnifier light (only for a table with a superstructure) : Switches the cold light in the telescopic arm on and off.

    6. Spotlight (only for a table with a superstructure) : Switches two reflector lamps, which can be plugged in, in the superstructure, on and off.

    7. Indicator : Illuminates if at least one waste container for chemicals has reached the maximum level.

    8. Alcohol dispenser (only for a table with a superstructure) : An alcohol dispenser is fixed underneath the operating panel.

    •

    Back to the top of this page 

    Different models

    Order N° PP05-0400 PP05-0405 PP05-0410 PP05-0415 PP05-0450 PP05-0455 PP05-0460 PP05-465
    superstructure no no no no yes yes yes yes
    height adjustment yes yes no no yes yes no no
    Double side workstation yes no yes no yes no yes no

     

    Back to the top of this page

    Accessories and Parts

    PP05-5003 Dissection plate in PE with black insert
    PP05-5041 Dissection plate in PE color blue
    PP05-5004 Enlargement for work top (14 cm / 5 1/2")

    PP05-5005 Strainer that fits into sink  
    PP05-5006 Shelf for instruments  
    PP05-5008 Container (without stainless steel plate)
    PP05-5012 Strainer for formaldehyde  
    PP05-5014 Halogen light
    PP05-5018 Hinged reading table

    PP05-5019 Document holder

    PP05-5020 Hinged table for a balance (max 5kgs)

    PP05-5021 Pedal to operate the water tap  
    PP05-5026 Waste bin (40 Liter)

    PP05-5030 Height adjustable fixations for the shelf for instruments  
    PP05-5032 Writing table (for table without enlargement)
    PP05-5800 Plint (Socle)
    PP05-5900 Protection plate  
    PP05-5910 Protection plate with surrounds  

     

    Back to the top of this page 

    TECHNICAL SPECIFICATIONS

    Dimensions

    Length: 65" (1,650 mm)
    Width: 31 1/2" (800 mm)
    Total height:     Max. 85"  (2,155 mm); Min.  73" (1,855 mm)
    Height of the work top:     Max. 44" (1,120 mm); Min. 32" (820 mm)

    Weight

    606 lbs. (275 kg)

    Materials

    Work top: Stainless steel (316 TI) AISI
    Panels: Stainless steel (304) AISI
    Dissection plate: HDPE natural

    Power supply

    Transformer:

  • In: 115 V AC 60 Hz 3 A
    Out: 20 V AC 60 Hz 300 VA

    • Table:

  • In: 20 V AC 60 Hz 300 VA
    •

    Intensity of light

  • Fluorescent lamps: 4 x 36 Watt Biolux from Osram 1,500 lux
    2 spotlights: 13°, 35 Watt, 5,000 lux
    Magnifier: 13°, 35 Watt, 3,000 lux

    • Connections

  • Water: 3/8" (x 2)
    Water drain pipe: Outer diameter of pipe – 2" (50 mm)
    Exhaust pipe: Outer diameter of pipe – 7.8" (200 mm)

    • Back to the top of this page